
Two points charges 4q and –q are fixed on the x-axis at x = \[ - \left( {\dfrac{d}{2}} \right)\] and x =\[\left( {\dfrac{d}{2}} \right)\] , respectively. If a third point charge ‘q’ is taken from the origin to x = d along the semicircle as shown in the figure, the energy of the charge will:

A. decrease by \[\dfrac{q^2}{{4\pi {\varepsilon _0}d}}\]
B. decrease by \[\dfrac{{4q^2}}{{3\pi {\varepsilon _0}d}}\]
C. increase by \[\dfrac{{3q^2}}{{4\pi {\varepsilon _0}d}}\]
D. increase by \[\dfrac{{2{q^2}}}{{3\pi {\varepsilon _0}d}}\]
Answer
232.8k+ views
Hint: To solve this question first we need to find initial potential energy and final potential energy. After subtracting the both we get the change in potential energy. Electric potential energy is defined as the energy that is required to move a charge opposite to the electric field.
Formula used:
The potential energy is given as,
\[U = \dfrac{1}{{4\pi {\varepsilon _0}}}\dfrac{q}{r}\]
Where q is the charge, r is the distance and \[{\varepsilon _0}\] is the permittivity.
Complete step by step solution:

Image: Two point charges 4q and –q are at a distance of \[ - \left( {\dfrac{d}{2}} \right)\] and \[\left( {\dfrac{d}{2}} \right)\] on the x-axis with respect to origin.
As we know the initial potential energy is given as,
\[{U_i} = \dfrac{1}{{4\pi {\varepsilon _0}}}\left[ {\dfrac{{4{q^2}}}{{\left( {\dfrac{d}{2}} \right)}} - \dfrac{{{q^2}}}{{\left( {\dfrac{d}{2}} \right)}}} \right]\]
As the final potential energy is given as,
\[{U_f} = \dfrac{1}{{4\pi {\varepsilon _0}}}\left[ {\dfrac{{4{q^2}}}{{\left( {\dfrac{{3d}}{2}} \right)}} - \dfrac{{{q^2}}}{{\left( {\dfrac{d}{2}} \right)}}} \right]\]
Now the change in potential energy will be
\[\Delta U = {U_f} - {U_i}\]
\[\Rightarrow \Delta U =\dfrac{1}{{4\pi {\varepsilon _0}}}\left[ {\dfrac{{4{q^2}}}{{\left( {\dfrac{{3d}}{2}} \right)}} - \dfrac{{{q^2}}}{{\left( {\dfrac{d}{2}} \right)}}} \right]\]-\[\dfrac{1}{{4\pi {\varepsilon _0}}}\left[ {\dfrac{{4{q^2}}}{{\left( {\dfrac{d}{2}} \right)}} - \dfrac{{{q^2}}}{{\left( {\dfrac{d}{2}} \right)}}} \right]\]
\[\therefore \Delta U = - \dfrac{{4{q^2}}}{{3\pi {\varepsilon _0}d}}\]
Here the negative sign shows the decreasing energy. Therefore, the energy of the charge will decrease by \[\dfrac{{4{q^2}}}{{3\pi {\varepsilon _0}d}}\].
Hence option B is the correct answer.
Note: As we know the energy that is needed to move a charge against an electric field. We need greater energy to accelerate a charge in the electric field but also greater energy to move it through a stronger electric field. At any given point in an electric field the electric potential energy is the electric potential multiplied by the amount of charge at that point. So, the voltage gives you how much potential energy could have at some point which is not dependent on how much charge you put there.
Formula used:
The potential energy is given as,
\[U = \dfrac{1}{{4\pi {\varepsilon _0}}}\dfrac{q}{r}\]
Where q is the charge, r is the distance and \[{\varepsilon _0}\] is the permittivity.
Complete step by step solution:

Image: Two point charges 4q and –q are at a distance of \[ - \left( {\dfrac{d}{2}} \right)\] and \[\left( {\dfrac{d}{2}} \right)\] on the x-axis with respect to origin.
As we know the initial potential energy is given as,
\[{U_i} = \dfrac{1}{{4\pi {\varepsilon _0}}}\left[ {\dfrac{{4{q^2}}}{{\left( {\dfrac{d}{2}} \right)}} - \dfrac{{{q^2}}}{{\left( {\dfrac{d}{2}} \right)}}} \right]\]
As the final potential energy is given as,
\[{U_f} = \dfrac{1}{{4\pi {\varepsilon _0}}}\left[ {\dfrac{{4{q^2}}}{{\left( {\dfrac{{3d}}{2}} \right)}} - \dfrac{{{q^2}}}{{\left( {\dfrac{d}{2}} \right)}}} \right]\]
Now the change in potential energy will be
\[\Delta U = {U_f} - {U_i}\]
\[\Rightarrow \Delta U =\dfrac{1}{{4\pi {\varepsilon _0}}}\left[ {\dfrac{{4{q^2}}}{{\left( {\dfrac{{3d}}{2}} \right)}} - \dfrac{{{q^2}}}{{\left( {\dfrac{d}{2}} \right)}}} \right]\]-\[\dfrac{1}{{4\pi {\varepsilon _0}}}\left[ {\dfrac{{4{q^2}}}{{\left( {\dfrac{d}{2}} \right)}} - \dfrac{{{q^2}}}{{\left( {\dfrac{d}{2}} \right)}}} \right]\]
\[\therefore \Delta U = - \dfrac{{4{q^2}}}{{3\pi {\varepsilon _0}d}}\]
Here the negative sign shows the decreasing energy. Therefore, the energy of the charge will decrease by \[\dfrac{{4{q^2}}}{{3\pi {\varepsilon _0}d}}\].
Hence option B is the correct answer.
Note: As we know the energy that is needed to move a charge against an electric field. We need greater energy to accelerate a charge in the electric field but also greater energy to move it through a stronger electric field. At any given point in an electric field the electric potential energy is the electric potential multiplied by the amount of charge at that point. So, the voltage gives you how much potential energy could have at some point which is not dependent on how much charge you put there.
Recently Updated Pages
JEE Main 2023 April 6 Shift 1 Question Paper with Answer Key

JEE Main 2023 April 6 Shift 2 Question Paper with Answer Key

JEE Main 2023 (January 31 Evening Shift) Question Paper with Solutions [PDF]

JEE Main 2023 January 30 Shift 2 Question Paper with Answer Key

JEE Main 2023 January 25 Shift 1 Question Paper with Answer Key

JEE Main 2023 January 24 Shift 2 Question Paper with Answer Key

Trending doubts
JEE Main 2026: Session 2 Registration Open, City Intimation Slip, Exam Dates, Syllabus & Eligibility

JEE Main 2026 Application Login: Direct Link, Registration, Form Fill, and Steps

Understanding the Angle of Deviation in a Prism

Hybridisation in Chemistry – Concept, Types & Applications

How to Convert a Galvanometer into an Ammeter or Voltmeter

Understanding Uniform Acceleration in Physics

Other Pages
JEE Advanced Marks vs Ranks 2025: Understanding Category-wise Qualifying Marks and Previous Year Cut-offs

Dual Nature of Radiation and Matter Class 12 Physics Chapter 11 CBSE Notes - 2025-26

Understanding the Electric Field of a Uniformly Charged Ring

JEE Advanced Weightage 2025 Chapter-Wise for Physics, Maths and Chemistry

Derivation of Equation of Trajectory Explained for Students

Understanding Electromagnetic Waves and Their Importance

