Answer
Verified
35.4k+ views
Hint: Polymers are chemical compounds with high molecular weight and made up of repeated units called monomers. These units can be the same or different. On the basis of the nature of monomers a polymer can be homo or copolymer.
Complete step by step answer:
LDPE and HDPE are thermoplastic polymers. Polymers are high molecular mass compounds whose structures are composed of a large number of simple repeating units. The repeating structural units are usually obtained from low molecular mass of simple compounds called monomers.
(i) Low density polythene (LDPE): It is prepared by heating pure ethylene at $190^\circ - 210^\circ C$ under a pressure of about $1500$atmosphere in the presence of traces of oxygen. The polymer produced consists of highly branched chain molecules. The branching does not allow the polymer molecules to undergo close packing and thus, the density of polymer is low and it has low melting point.
$\mathop {nC{H_2} = C{H_2}}\limits_{ethene} \xrightarrow[{\left( {oxygen} \right)}]{{200^\circ C,{\text{ 1500 atm}}}}\mathop {{{\left[ { - {H_2}C - C{H_2} - } \right]}_n}}\limits_{\left( {polyethene} \right)} $
Low density polythene can be represented as,
It is chemically inert, tough but flexible. It is a poor electrical conductor. It is used for packaging, cable insulation and in the manufacture of pipes, squeeze bottles and toys.
High density polythene (HDPE): It is manufactured by coordination polymerisation of ethylene in a hydrocarbon solvent at $60^\circ - 70^\circ C$under a pressure of$6 - 7$atmosphere in the presence of a catalyst such as triethyl aluminium and titanium tetra chloride.
\[nC{H_2} = C{H_2}\xrightarrow[{TiC{l_4} + Al{{\left( {{C_2}{H_5}} \right)}_3}}]{{60^\circ - 70^\circ C,{\text{ 6atom}}}}\mathop {{{\left[ { - C{H_2} - C{H_2} - } \right]}_n}}\limits_{\left( {polyethene} \right)} \]
The structure of HDPE can be represented as,
The polymer thus produced, consists of practically linear molecules which are closely packed and have high density.
It is chemically inert but tough and harder. Its tensile strength is more than that of low density polymers. It is used in making housewares such as buckets, dustbin, bottle, pipes, toys, etc.
Hence, the correct option is (A).
Note:
In general high density grade polythene have densities up to $0.97g/c{m^3}$and low density grade polythene have density as low as $0.91g/c{m^3}$. High density material is more linear and crystalline. Low density polythene has less stiffness than the high density polythene.
Complete step by step answer:
LDPE and HDPE are thermoplastic polymers. Polymers are high molecular mass compounds whose structures are composed of a large number of simple repeating units. The repeating structural units are usually obtained from low molecular mass of simple compounds called monomers.
(i) Low density polythene (LDPE): It is prepared by heating pure ethylene at $190^\circ - 210^\circ C$ under a pressure of about $1500$atmosphere in the presence of traces of oxygen. The polymer produced consists of highly branched chain molecules. The branching does not allow the polymer molecules to undergo close packing and thus, the density of polymer is low and it has low melting point.
$\mathop {nC{H_2} = C{H_2}}\limits_{ethene} \xrightarrow[{\left( {oxygen} \right)}]{{200^\circ C,{\text{ 1500 atm}}}}\mathop {{{\left[ { - {H_2}C - C{H_2} - } \right]}_n}}\limits_{\left( {polyethene} \right)} $
Low density polythene can be represented as,
It is chemically inert, tough but flexible. It is a poor electrical conductor. It is used for packaging, cable insulation and in the manufacture of pipes, squeeze bottles and toys.
High density polythene (HDPE): It is manufactured by coordination polymerisation of ethylene in a hydrocarbon solvent at $60^\circ - 70^\circ C$under a pressure of$6 - 7$atmosphere in the presence of a catalyst such as triethyl aluminium and titanium tetra chloride.
\[nC{H_2} = C{H_2}\xrightarrow[{TiC{l_4} + Al{{\left( {{C_2}{H_5}} \right)}_3}}]{{60^\circ - 70^\circ C,{\text{ 6atom}}}}\mathop {{{\left[ { - C{H_2} - C{H_2} - } \right]}_n}}\limits_{\left( {polyethene} \right)} \]
The structure of HDPE can be represented as,
The polymer thus produced, consists of practically linear molecules which are closely packed and have high density.
It is chemically inert but tough and harder. Its tensile strength is more than that of low density polymers. It is used in making housewares such as buckets, dustbin, bottle, pipes, toys, etc.
Hence, the correct option is (A).
Note:
In general high density grade polythene have densities up to $0.97g/c{m^3}$and low density grade polythene have density as low as $0.91g/c{m^3}$. High density material is more linear and crystalline. Low density polythene has less stiffness than the high density polythene.
Recently Updated Pages
To get a maximum current in an external resistance class 1 physics JEE_Main
If a wire of resistance R is stretched to double of class 12 physics JEE_Main
Let f be a twice differentiable such that fleft x rightfleft class 11 maths JEE_Main
Find the points of intersection of the tangents at class 11 maths JEE_Main
For the two circles x2+y216 and x2+y22y0 there isare class 11 maths JEE_Main
The path difference between two waves for constructive class 11 physics JEE_MAIN
Other Pages
Differentiate between homogeneous and heterogeneous class 12 chemistry JEE_Main
Two identical charged spheres suspended from a common class 12 physics JEE_Main
In a CO molecule the distance between C mass12 amu class 12 physics JEE_Main
If a wire of resistance R is stretched to double of class 12 physics JEE_Main
Oxidation state of S in H2S2O8 is A 6 B 7 C +8 D 0 class 12 chemistry JEE_Main
The mole fraction of the solute in a 1 molal aqueous class 11 chemistry JEE_Main