
A tube is mounted so that its base is at height 'h' above the horizontal ground. The tank is filled with water to a depth h. A hole is punched in the side of the tank at depth y below the water surface. Then the value of y so that the range of the emerging stream would be maximum is?
A) $h$
B) $h/2$
C) $h/4$
D) $3h/4$
Answer
232.8k+ views
Hint: The velocity of the water coming out from the hole will increase with increasing depth. Higher the velocity of the water, the higher the range it will cover.
Formula used: In this solution, we will use the following formula:
Bernoulli’s Equation: ${P_{atm}} + \rho gh + \dfrac{1}{2}\rho {v^2} = {\text{constant}}$ where $P$ is the pressure of the water at a certain point, ${P_{atm}}$ is the atmospheric pressure, $h$ is the height of the system, and $v$ is the velocity of the water
Complete step by step answer:
The velocity of the water from the hole can be calculated from Bernoulli’s theorem. Since the water coming out of the container will experience atmospheric pressure, using Bernoulli’s theorem inside the tube and just outside the hole where the water is flowing out, we get
$\rho gy = \dfrac{1}{2}\rho {v^2}$
Solving for $v$, we get
$v = \sqrt {2gy} $
We can see that the velocity of the projectile will increase with the increasing depth of the tube. So, the maximum velocity will be at a depth of $h$.
Hence the correct choice is option (A).
Note: The reason for the maximum velocity of water having maximum range is because it acts as half of a projectile motion. Also, the bottom of the tube is mounted at a platform that is at a height $h$ above the ground which is also equal to the height of the tube. If the height of the tube and the platform were not equal, we would have to calculate the range of the water projectile and differentiate it with respect to height to find the depth for maximum range.
Formula used: In this solution, we will use the following formula:
Bernoulli’s Equation: ${P_{atm}} + \rho gh + \dfrac{1}{2}\rho {v^2} = {\text{constant}}$ where $P$ is the pressure of the water at a certain point, ${P_{atm}}$ is the atmospheric pressure, $h$ is the height of the system, and $v$ is the velocity of the water
Complete step by step answer:
The velocity of the water from the hole can be calculated from Bernoulli’s theorem. Since the water coming out of the container will experience atmospheric pressure, using Bernoulli’s theorem inside the tube and just outside the hole where the water is flowing out, we get
$\rho gy = \dfrac{1}{2}\rho {v^2}$
Solving for $v$, we get
$v = \sqrt {2gy} $
We can see that the velocity of the projectile will increase with the increasing depth of the tube. So, the maximum velocity will be at a depth of $h$.
Hence the correct choice is option (A).
Note: The reason for the maximum velocity of water having maximum range is because it acts as half of a projectile motion. Also, the bottom of the tube is mounted at a platform that is at a height $h$ above the ground which is also equal to the height of the tube. If the height of the tube and the platform were not equal, we would have to calculate the range of the water projectile and differentiate it with respect to height to find the depth for maximum range.
Recently Updated Pages
Dimensions of Charge: Dimensional Formula, Derivation, SI Units & Examples

How to Calculate Moment of Inertia: Step-by-Step Guide & Formulas

Circuit Switching vs Packet Switching: Key Differences Explained

Dimensions of Pressure in Physics: Formula, Derivation & SI Unit

JEE General Topics in Chemistry Important Concepts and Tips

JEE Extractive Metallurgy Important Concepts and Tips for Exam Preparation

Trending doubts
JEE Main 2026: Session 2 Registration Open, City Intimation Slip, Exam Dates, Syllabus & Eligibility

JEE Main 2026 Application Login: Direct Link, Registration, Form Fill, and Steps

JEE Main Marking Scheme 2026- Paper-Wise Marks Distribution and Negative Marking Details

Understanding the Angle of Deviation in a Prism

Hybridisation in Chemistry – Concept, Types & Applications

How to Convert a Galvanometer into an Ammeter or Voltmeter

Other Pages
JEE Advanced Marks vs Ranks 2025: Understanding Category-wise Qualifying Marks and Previous Year Cut-offs

Laws of Motion Class 11 Physics Chapter 4 CBSE Notes - 2025-26

Waves Class 11 Physics Chapter 14 CBSE Notes - 2025-26

Mechanical Properties of Fluids Class 11 Physics Chapter 9 CBSE Notes - 2025-26

Thermodynamics Class 11 Physics Chapter 11 CBSE Notes - 2025-26

Units And Measurements Class 11 Physics Chapter 1 CBSE Notes - 2025-26

