Courses
Courses for Kids
Free study material
Offline Centres
More
Store Icon
Store

Light Reflection and Refraction Class 10 Notes CBSE Science Chapter 9 (Free PDF Download)

ffImage

CBSE Class 10 Science Chapter 9 - Light Reflection and Refraction Revision Notes - Free PDF Download

In this Chapter from Class 10 Physics, students will learn in detail about one of the most common optical phenomena that we see around us – reflection and refraction of light. Apart from that, it will also focus on studying these two phenomena with the aid of the straight-line propagation theory of light along with their practical application.

The light reflection and refraction of Class 10 notes have been curated by experienced teachers strictly according to the latest NCERT syllabus to aid students in their preparation for Class 10 board examinations. Students can also access the revision notes in PDF to study from any device and at any time according to their convenience. Vedantu is a platform that provides free CBSE Solutions (NCERT) and other study materials for students. You can also download Class 10 Science and Class 10 Maths NCERT Solutions to help you to revise the complete syllabus and score more marks in your examinations.

Important Topics under CBSE Class 10 Science Chapter 9 - Light Reflection and Refraction

Following are the important topics covered under the chapter on Light Reflection and Refraction.

  1. Reflection of Light

  2. Sign Convention for Spherical Mirrors

  3. Mirror Formula and Magnification

  4. Spherical Mirrors

  5. Image Formation by Spherical Mirrors

  6. Refractive Index

  7. Refraction by Spherical Lenses

  8. Refraction of Light

  9. Refraction through a Rectangular Glass Slab

  10. Lens Formula and Magnification

  11. Power of a Lens

  12. Image Formation by Lenses and Their Ray Diagrams

  13. Sign Convention for Spherical Lenses

Download CBSE Class 10 Science Revision Notes 2024-25 PDF

Also, check CBSE Class 10 Science revision notes for All chapters:


Watch videos on

Light Reflection and Refraction Class 10 Notes CBSE Science Chapter 9 (Free PDF Download)
Previous
Next
Vedantu 9&10
Subscribe
Download Notes
iconShare
Light Class 10 in One Shot Part -2 | Refraction CBSE Class 10 2023-24| Abhishek Sir @Vedantu9_10
11.2K likes
226.3K Views
3 years ago
Vedantu 9&10
Subscribe
Download Notes
iconShare
Light Class 10 in One Shot | Reflection Part -1 | CBSE Class 10 | Abhishek Sir @Vedantu9_10 ​
27.6K likes
652.6K Views
3 years ago

Access CBSE Class 10 Science Chapter 9 - Light Notes

Important Terms 

Light is a type of energy that can be converted into other types of energy.

Light does not require a physical medium to propagate.

Light's velocity in air or vacuum is $3\times 10^{8} \mathrm{~m}/ \mathrm{s}$.


Rectilinear Propagation of Light 

Light travels in a straight line in a homogeneous transparent medium, which is known as rectilinear propagation of light. 


Reflection of Light 

Reflection of light describes the phenomenon by which a ray of light changes its propagation direction when it encounters a boundary between different media through which it cannot pass. 

There are two types of reflection of light: 

  • Regular reflection or specular reflection 

  • Irregular reflection or diffused reflection 


Regular Reflection 

The perfect, mirror-like reflection of light is known as specular or regular reflection. Regular reflections include reflections in mirrors, water surfaces, and highly polished floors. 


Specular Reflection


Irregular Reflection: 

Irregular reflection, also known as diffused reflection, occurs when a ray of light strikes a rough or unpolished wall or wood. In this case, the incident light is reflected in different directions by different parts of the surface. There is no definite image formed in such cases, but the surface becomes visible. It is commonly referred to as light scattering. As a result of the diffused reflection, non-luminous objects become visible. 


Diffuse Reflection


Reflection of Light by a Plane Surface: 

The diagram depicts how a light ray is reflected by a plane surface. Assume MM' is a reflecting surface. When a light ray strikes MM' in the direction IO, it is reflected along the direction OR. The incident ray is denoted by IO, the point of incidence by O, and the reflected ray by OR.


Reflection by a Plane Mirror


Let ON be the perpendicular normal to the surface MM' at the point of incidence. The angle of incidence, denoted by the letter I is the angle formed by the incident ray with the normal at the point of incidence. The angle of reflection 'r' is the angle formed by the reflected ray and the normal at the point of incidence. A reflecting surface is something like a mirror.

Laws of Reflection: 

The laws of reflection are observed to apply to any plane surface's reflection. The incident ray, reflected ray, and normal at the point of incidence all lie in the same plane, according to the laws of reflection. The angle of incidence equals the angle of reflection.

Nature of Image Formed By a Plane Reflecting Surface: 

An image can be both real and virtual. When light rays intersect after reflection, a true image is formed. When the light rays after reflection do not actually intersect but appear to diverge from it, a virtual image is formed (these rays of light intersect when produced backwards).


Virtual Image by a Plane Mirror

Ray Diagrams of Plane Mirrors: 

When drawing ray diagrams, the following rays are usually taken into account: A ray of light incident at 90 degrees on a plane mirror is reflected from the mirror along the same path. A ray of light falling at any angle on a plane mirror is reflected from it in such a way that the angle of incidence equals the angle of reflection. The image is formed when the reflected rays appear to collide.


Image Formation by Plane Mirror


Spherical Mirrors: 

A spherical mirror is a mirror with a polished, reflecting surface that is part of a hollow sphere of glass or plastic. One of the two curved surfaces of a spherical mirror is coated with a thin layer of silver, followed by a coat of red lead oxide paint. As a result, one side of the spherical mirror is opaque, while the other is a highly polished reflecting surface. The opaque side of a mirror is always shaded in a diagram.

Please keep in mind that the opaque, non-reflecting side is shaded blue in the diagrams below, while the reflecting side is shaded red.

The spherical mirror is classified as follows based on the nature of its reflecting surface:

Concave Mirror 

A concave mirror is a spherical mirror with its reflecting surface oriented toward the centre of the sphere of which it is a part.

Convex Mirror 

A convex mirror is a spherical mirror with a reflecting surface that is angled away from the centre of the sphere of which it is a part.


Concave and Convex Mirror


Centre of Curvature:

The centre of curvature is the centre of the sphere, of which the spherical mirror is a part. It is represented by the letter C.


Center of curvature


Radius of Curvature: The radius of the sphere, of which the mirror is a part, is defined as the radius of curvature. It is denoted by the letter R.


Radius of Curvature


Linear Aperture: The distance between the extreme points (X and Y) on the mirror's periphery is defined as the linear aperture.


Linear Aperture


Pole: The pole is the spherical mirror's aperture's midpoint. It is denoted by the letter P.


Pole


Principal Axis

The principal axis of a spherical mirror is the straight line that passes through the pole and the centre of curvature.


Principal Axis


Secondary Axis: A secondary axis is any radial line other than the principal axis that passes through the centre of curvature. 


Secondary Axis


Normal: The normal at any point on the spherical mirror is the straight line formed by connecting that point to the mirror's centre. The normal at point A on the mirror is the line AC obtained by connecting A to the mirror's centre of curvature. The radius of the sphere of which the mirror is a part is equal to the normal at any point on a spherical mirror.


Normal Axis


Principal Focus or Focus: 


Principal Focus


After reflection, light rays parallel to the principal axis of a mirror either pass through a point (in the case of a concave mirror) or appear to diverge from a point (in the case of a convex mirror), and this point is referred to as the mirror's principal focus or focal point.

Focal Length: The focal length of a mirror is the distance between the pole and the focus. It is symbolized by the letter f.

Characteristics of Focus of a Concave Mirror and a Convex Mirror

Convex Mirror

Concave Mirror

The focal point is hidden behind the mirror.

The focus is on the mirror.

Because the rays of light after reflection appear to come from the focus, the focus is virtual.

The focus exists because light rays converge at the focus after reflection.


Sign Convention for Spherical Mirrors 

In the ray diagrams of spherical mirrors, the following sign convention is used to measure various distances:

The object is always positioned to the left of the mirror.

All distances are measured from the mirror's pole.

Distances measured in the direction of the incident ray are positive, while distances measured in the opposite direction are negative.

Distances measured above the principal axis are positive, while distances measured below the principal axis are negative.


Spherical Concave Mirror


Spherical Convex Mirror

Concave Mirror 

When an object is placed in front of a concave mirror, light rays from the object are reflected on the mirror. At the point where the reflected rays intersect or appear to intersect, an image is formed. The formation of an image by mirrors is typically depicted by drawing ray diagrams. To create a ray diagram, we need at least two rays with known paths after reflection from the mirror. These rays must be chosen based on our needs. To obtain the image, any two of the following rays can be considered.

After reflection from a concave mirror, a ray of light parallel to the principal axis passes through its focus. 


Reflection From a Concave Mirror


After reflection, a ray of light passing through the focus of a concave mirror emerges parallel to the principal axis.


Reflection From a Concave Mirror


As the ray passing through the centre of curvature acts as a normal to the spherical mirror, a ray passing through the centre of curvature retraces its path after reflection.


Reflection From a Concave Mirror


According to the law of reflection, a ray of light striking the mirror at its pole is reflected.


Reflection From a Concave Mirror


Formation of Image by a Concave Mirror 

When the Object Is At Infinity 

When an object is placed at infinity, its rays are parallel to each other. Consider two rays, one striking the pole of the mirror and the other passing through the centre of curvature. The incident ray at the pole is reflected according to the law of reflection, and the second ray that passes through the mirror's centre of curvature retraces its path. After reflection, these rays form an image at the focus. The resulting image is accurate, inverted, and scaled down. 

The image is at F 

Real 

Inverted 

Diminished


Object At Infinity


When the Object Is Placed Beyond C 

The two rays considered in order to obtain the image are:

A ray that passes through the centre of the curvature.

A ray that runs parallel to the principal axis.

After reflection, the ray passing through the centre of curvature retraces its path, and the ray parallel to the principal axis passes through the focus. After reflection, these rays intersect at a point between C and F.

The image is inverted, real, and shrunk. The image is: 

Between C and F 

Real 

Inverted 

Diminished 


Object Beyond C


When the Object Is Placed At the Centre of Curvature 

In this section, we will look at two rays, one parallel to the principal axis and the other passing through the focus. After reflection, the ray of light parallel to the principal axis passes through the focus. After reflection, the other ray that passes through the focus emerges parallel to the axis. Following reflection, these rays collide at the centre of curvature to form an inverted image that is real and the same size as the object. 

The image is: 

At C 

Real 

Inverted 

Same size as object 


Object Placed at Center of Curvature


When the Object is Between C and F 

Consider a light ray parallel to the principal axis and another ray passing through the focus. The ray that is parallel to the principal axis passes through the principal focus, and the ray that emerges parallel to the principal axis after reflection. The reflected rays collide at a point beyond C, resulting in a real, inverted, and magnified image. 

The image is: 

Beyond C 

Real 

Inverted 

Magnified 


Object Between C and F


When the Object is at the Focus 

Consider a light ray parallel to the principal axis and another ray passing through the centre of curvature. The ray parallel to the principal axis passes through the focus, while the ray through the centre of curvature retraces its path. The reflected rays are parallel to each other and would only meet at infinity, implying that the image is formed at infinity and is a true, inverted, and enlarged image. 

The image is at infinity: 

Real 

Inverted 

Magnified 


Object at Focus


When the Object Is Between the Pole and the Focus 

Consider a ray of light parallel to the principal axis and another ray passing through the centre of curvature. After reflection, the ray that passes through the centre of curvature retraces its path, and the other ray that is parallel to the principal axis passes through the focus. When the reflected rays are extended backwards, these rays appear to meet behind the mirror. The image is erect, virtual, and magnified. 

The image is: 

Behind the mirror 

Virtual 

Erect 

Magnified 


Object Between Pole and Focus


Uses of Concave Mirrors 

Concave mirrors are used to obtain a parallel beam of light in the following applications: as reflectors in car headlights, search lights in torches, and so on. The light source is positioned at the concave reflector's focus for this purpose.


Concave Mirror Uses


Fig. Headlight of Car

Light is focused on the tooth to be examined by the dentist.


Concave Mirror Uses


As shaving and make-up mirrors to obtain an enlarged erect image of the face


Concave Mirror Uses


Solar radiations are concentrated in solar heating devices. The food or substance to be heated is placed in the centre of a large concave reflector for this purpose. Sunlight converges on the substance after reflection and heats it.


Convex Mirror 

When creating ray diagrams, the following rays are taken into account. After reflection from a convex mirror, a ray of light traveling parallel to the principal axis appears to come from its focus behind the mirror.


Object between Infinity and the Pole


A ray of light traveling towards the mirror's centre of curvature hits the mirror at 90o and is reflected along its path.


Object Between Infinity and Pole


A ray of light directed towards the principal focus of a convex mirror will emerge parallel to the principal axis after reflection.

According to the laws of reflection, a ray of light incident obliquely to the principal axis and directed towards the pole of the mirror is reflected.

Regardless of the position, a convex mirror always produces a virtual image. 


Formation of Image in a Convex Mirror 

When the Object Is Placed Between Infinity and the Pole of the Mirror 

The image is: 

Formed between the pole and the focus 

Erect 

Diminished 

Virtual 


Between P and F


When the Object Is At Infinity 

The image is: 

Formed at the focus 

Extremely diminished 

Virtual 

Erect 


Object at Infinity


Uses Of Convex Mirror 

A rear-view mirror in a car. This convex mirror provides the driver with a clear view of approaching traffic from behind because convex mirrors are curved outwards, providing a wider field of view.


Uses of Convex Mirror


In department stores, there is a vigilance mirror.


Uses of Convex Mirror


Reflectors are used in street lamps to divert light over a large area.

Position of Object

Position of Image

Size of the Image

Nature of the Image

At infinity

At focus

Extremely diminished

Virtual and erect

Between infinity and pole of the mirror

Between the focus and pole

Diminished

Virtual and erect


Mirror Formula

$\frac{1}{f}=\frac{1}{v}+\frac{1}{u}$

Here, $u$ is the Object distance, $v$ is the Image distance and $f$ is the Focal length.


Magnification 

The magnification produced by a spherical mirror indicates the extent to which an object's image is magnified in relation to the object size.

Magnification is defined as the ratio of the image's height to the object's height. The letter m is commonly used to represent it.

If h is the object's height and h' is the image's height, then the magnification m produced by a spherical mirror can be written as

$m=\frac{h^{\prime}}{h}$

The magnification $\mathrm{m}$ is also related to the object distance $(\mathrm{u})$ and image distance (v). It can be expressed as:

$m=\frac{h^{\prime}}{h}=-\frac{v}{u}$

The negative sign in the value of the magnification indicates that the image is real. A positive sign in the value of the magnification indicates that the image is virtual.

Refraction: The deviation in the path of light when it passes from one medium to another medium of different density is called refraction. 

The twinkling of stars is due to atmospheric refraction of starlight. Since light bends towards the normal the apparent position of the star is slightly different from its actual position as it passes through the atmosphere. Hence the star appears slightly higher than its actual position. Due to changing condition of earth's atmosphere the apparent position of the star changes slightly and the intensity of light reaching the eye also fluctuates. This gives rise to the twinkling effect of the star.

Incident Ray (IO) 

The ray of light striking the surface of separation of the media through which it is traveling is known as the incident ray. 

Point of Incidence (O) 

The point at which the incident ray strikes the surface of separation of the two media is called the point of incidence. 

Normal (N) 

The perpendicular drawn to the surface of separation at the point of incidence is called the normal. 

Refracted Ray (OR) 

The ray of light which travels into the second medium, when the incident ray strikes the surface of separation between the media 1 and 2, is called the refracted ray. 

Angle of Incidence (i) 

The angle which the incident ray makes with the normal at the point of incidence, is called angle of incidence. 

Angle of Refraction (r) 

The angle which the refracted ray makes with the normal at the point of incidence, is called angle of refraction. A ray of light refracts or deviates from its original path as it passes from one optical medium to another because the speed of light changes. 


Laws of Refraction 

The incident ray, the refracted ray and the normal to the surface at the point of incidence all lie in one plane. For any two given pair of media, the ratio of the sine of the angle of incidence to the sine of the angle of refraction is a constant. The above law is called Snell's law after the scientist Willebrod Snellius who first formulated it

Thus, 

$\frac{\sin i}{\sin r}=\text { a constant }=\mu$

Where µ is the refractive index of the second medium with respect to the first medium.

The refractive index of glass with respect to air is given by the relation. 

In general, if a ray of light is passing from medium 1 to medium 2, then 

If the medium 1 is air or vacuum, the refractive index of medium 2 is referred to as the absolute refractive index. The refractive index of a medium depends on the following factors: The nature of the medium. The colour or wavelength of the incident light. 


Refraction of Light through a Glass Slab 

When a ray light is passing from air to glass, that is, from a rarer medium to a denser medium, the refracted ray bends towards the normal drawn at the point of incidence. In this case angle of i > angle of r. But when the ray of light is passing from glass to air, that is, from a denser medium to a rarer medium the refracted ray bends away from the normal. In this case angle of r > angle of i. The emergent ray, O1E which is nothing but the refracted ray emerging out of the glass slab is parallel to the incident ray. This means that the refracted ray (emergent ray) has been displaced from its original path by a distance XY. This displacement is referred to as lateral displacement. 


Lenses 

A lens is a portion of a transparent refracting medium bounded by two generally spherical or cylindrical surfaces, or one curved and one plane surface. Convex lenses and converging lenses are the two types of lenses.

Convex Lens 

A convex lens is one that is thicker in the centre and thinner at the edges. A convex lens has at least one surface that bulges out in the middle. Convex lenses are classified as bi-convex or double-convex, Plano - convex lens and concavo - convex lens based on their shape.


Convex Lenses


Concave Lens 

A concave lens is one that is thinner in the centre and thicker at the edges. These lenses, like convex lenses, are classified as: 

bi-concave 

Plano - concave 

convexo - concave 


Concave Lenses


Terminology Used in Optics 

Optical Centre


Optical Center


It is the focal point of a lens. It is represented by the letter O. A ray of light passing through the optical centre of a lens does not deviate in any way. It is also known as an optic centre. 

Principal Axis


Principal Axis


The principal axis is the straight line that connects the centres of curvature of a lens's two curved surfaces.

Principal Foci

Rays of light can pass through the lens in any direction, so there will be two principal foci on either side of the lens, which are referred to as the first and second principal foci of a lens, respectively. 

First Principal Focus (F1) 

It is a point on the lens's principal axis where light rays starting from it (convex lens) or appearing to meet at the point (concave lens) become parallel to the lens's principal axis after refraction from the two surfaces of the lens.


Principal Focus of a Convex Lens


Principal Focus of a Concave Lens


The distance between the optic centre and the first focus is referred to as the lens's first focal length (f1). 

Second Principal Focus (F2) 

It is a point on the lens's principal axis at which light rays parallel to the lens's principal axis after refraction from both surfaces of the lens pass through (convex lens) or appear to come from this point (concave lens).


Principal Focus of a Convex Lens


Principal Focus of a Concave Lens


The distance between the optic centre and the second principal focus is referred to as the lens's second focal length (f2). The first and second focal lengths will be equal if the medium on both sides of the lens is the same. The focus of a convex lens is physical, whereas the focus of a concave lens is virtual. 

Sign Convention for Spherical Lenses 

All distances are measured from the lens's optical centre. Distances measured in the direction of the incident light are considered positive, while distances measured in the opposite direction of the incident light are considered negative. All measurements taken above the principal axis are considered positive, while measurements taken below the principal axis are considered negative, i.e., object height is always considered positive, while image height is only considered positive for virtual images. 

Formation of Image by a Convex Lens 

A ray of light passing through the lens's optical centre travels straight and without deviation. Only in the case of a thin lens does this hold true.


Convex Lense Image Formation


After refraction, an incident ray parallel to the principal axis passes through the focus.


Convex Lens Image Formation


After refraction, an incident ray passing through the focus of a lens emerges parallel to the principal axis. 


Convex Lens Image Formation


When the Object is Placed between F1 and O 


Object is Placed between F1 and O


The image is: 

Formed behind the object 

Virtual 

Erect 

Magnified 

When the Object is placed at 2F1 


Object is placed at 2F1


The image is: 

Formed at 2F2 

Real 

Inverted 

Same size as the object 

When the Object is placed Between F1 and 2F1 


Object is placed Between F1 and 2F1


The image is: 

Formed beyond 2F2 

Real 

Inverted 

Magnified 

When the Object is placed at F1 


Object is placed at F1


The image is: 

formed at infinity 

real 

inverted 

magnified 

When the Object is placed beyond 2F1 


Object is placed beyond 2F1


The image is: formed between F2 and 2F2 real inverted diminished. 

When the Object is placed at Infinity 

When the object is at infinity, the rays coming from it are parallel to each other. The image is: 

formed at F2 inverted 

real 

highly diminished 


Object placed at Infinity


Convex lenses are also used in spectacles to correct the vision problem hypermetropia.


Formation of Image by a Concave Lens 

After refraction, an incident ray of light from an object parallel to the principal axis of a concave lens appears to come from its focus.


Image by a Concave Lens


An incident ray of light that passes through the optical centre exits the lens with no deviation. 


Image by a Concave Lens


Whatever the object's position, a concave lens always produces a virtual, erect, and diminished image. Let us now draw ray diagrams to show where the images are when the object is placed - at infinity, between O and F1, and anywhere between infinity and O.

When the Object is at Infinity 


Object at Infinity


The image is: formed at F1 erect virtual diminished. 


When the Object is Placed at Any Position Between O and Infinity 

The image is: formed between O and F1 erect virtual diminished 


Object at Infinity


Uses of Concave Lens 

  • It is used to correct myopia in spectacles.

  • It is used in conjunction with a convex lens to correct flaws such as chromatic and spherical aberration (the failure of rays to converge at one focus because of a defect in a lens or mirror).


Sign Convention for Lenses 

For measuring various distances, the following sign convention is used: 


Direction of Incident Ray


Direction of Incident Ray


  • All distances on the principal axis are measured from the optical centre.

  • Distances measured in the direction of incident rays are positive, while distances measured in the opposite direction of incident rays are negative.

  • All measurements taken above the principal axis are positive. As a result, the height of an object and the height of an erect image are both positive, while all distances measured below the principal axis are negative. 

Note: 

The rules are the same as for spherical mirrors.

The sign convention for lenses is shown in the table below:

For measuring various distances, the following sign convention is used: 


Direction of Incident Ray


The optical centre is used to measure all distances along the principal axis. Distances measured in the direction of incident rays are positive, while distances measured in the opposite direction of incident rays are negative. All measurements taken above the principal axis are positive. As a result, the height of an object and the height of an erect image are both positive, while all distances measured below the principal axis are negative. 


Lens Formula 

The lens formula or lens equation describes the relationship between the object's distance (u), the image's distance (v), and the focal length (f) of the lens.

$\frac{1}{f}=\frac{1}{v}-\frac{1}{u}$

This lens formula works for both convex and concave lenses.

Note: Things to keep in mind when using the lens formula. The known parameter values should be used with their proper sign according to the sign convention. During calculations, the unknown parameter should not be given a sign. 

Magnification 

Magnification is defined as the ratio of image size (hI) to object size (ho).

Depending on the size and nature of the image, the magnification produced by a lens can be equal to one, greater than one, or less than one.

Case I 

When the image's height (hI) equals the object's height (ho).

$\mathrm{m}=\frac{\mathrm{h}_{\mathrm{I}}}{\mathrm{h}_{\mathrm{o}}}=1$

As a result, when the magnification is set to one, the size of the image is the same as the size of the object.

Case II

When the image's height $\left(\mathrm{h}_{1}\right)$ is greater than the object's height $\left(\mathrm{h}_{\mathrm{o}}\right)$.

$\mathrm{m}=\frac{\mathrm{h}_{\mathrm{I}}}{\mathrm{h}_{\mathrm{o}}}>1$

The image is magnified.

Case III

When the image's height $\left(h_{1}\right)$ is lesser than the object's height $\left(h_{0}\right)$.

$\mathrm{m}=\frac{\mathrm{h}_{\mathrm{I}}}{\mathrm{h}_{\mathrm{o}}}<1$

The image is diminished.

The height of the object is always positive for both types of lenses, whereas the height of the image can be + or - depending on its nature. The height of an inverted and real image is negative according to lens sign convention, and thus the magnification of a lens is negative when it produces an inverted and real image. The image's height is positive for an erect and virtual image. When an erect and virtual image is formed, the magnification is positive. 


Power of a Lens 

A ray of light bends whenever it passes through a lens (except when it passes through the optical centre). Convergence is the bending of light rays towards the principal axis, and divergence is the bending of light rays away from the principal axis. The power of a lens expresses its degree of convergence or divergence. A lens with a short focal length deviates the rays more than a lens with a long focal length. As a result, a lens's power is defined as the reciprocal of its focal length in meters.

$\text { Power of a lens }=\frac{1}{\text { Focal length in metres }}$

The unit of power is dioptre.

If a convex lens has a power of one D, its focal length is one meter.


Dispersion and Scattering of Light 

Newton's Experiment - Dispersion of Light 

Sir Isaac Newton discovered that the images of heavenly bodies formed by a lens were colored at the edges while studying them. In order to investigate this, he conducted an experiment with a prism in 1665. Newton's room at Trinity College, Cambridge, was darkened, and a beam of sunlight passed through a small circular hole in the shutter, forming a white circular patch on the opposite wall. He then placed a triangular prism in the path of the light beam and observed that the white light was split into seven colors, which resembled the colors of a rainbow, namely violet, indigo, blue, green, yellow, orange, and red (VIBGYOR).


Dispersion of Light


Dispersion is the splitting of white light into its constituent colors when it passes through a transparent medium. A spectrum is a band of colors that results from the dispersion of white light.

Newton deduced from the preceding experiment that white light is a mixture of seven different colors.

Tracing the Path of Light through a Prism 

Let us now trace light's path through a prism. Trace the ABC boundary of a prism on a white sheet of paper with the triangular face on the sheet.

Attach two T and S pins to one side.

Place the prism on the ABC boundary.

Fix two more pins Q and R through the other side so that all four pins appear to be in the same line.

Remove the pins and make a note of where they are.

Connect TS and RQ and extend them to meet the prism faces at P and O, respectively. Participate in PO.


Path of Light through a Prism


The incident ray is represented by TP.

The refracted ray is represented by PO.

And OR denotes the emergent ray that is bent towards the bottom.

Let PN and ON represent the normals at P and O, respectively.

Let I be the incidence angle and r be the refraction angle.

If the incident ray TP is extended forward and the emergent ray RO is extended backwards, they will intersect at M, forming the angle OML.

OML is the angle measured. This angle is referred to as the angle of deviation.

The angle of deviation of an incident ray is the angle through which it deviates. This should be repeated for different angles of incidence.

Dispersion of White Light by a Glass Prism 

Even though all colors of the visible spectrum travel at the same speed in a vacuum, their speed varies when they pass through a transparent medium such as glass or water. That is, the refractive index of glass varies depending on the colour.

When a polychromatic light (multi colored or light with more than one wavelength), such as white light, strikes the first surface of the prism, it is refracted. However, each constituent of white light is refracted from a different angle, causing white light to be dispersed. When these colors strike the prism's second surface, they undergo refraction (being refracted from a denser to a rarer medium) and are further separated. A white light beam incident on a prism splits into its constituent colors, forming a spectrum. 

Each component of the white light is deviated towards the prism's base. Violet has the greatest deviation, while red has the least. The obtained spectrum is impure because the colors in the spectrum lack sharp boundaries, i.e., each color merges gradually into the next.


Dispersion of White Light


Recomposition of White Light 

The prisms are arranged as shown in the diagram to produce white light from dispersed light. Recomposition of white light is the recombination of the seven colors of dispersed white light to produce white light.

Experiment to Show the Recomposition of White Light 

Set up a prism (P1) on a table with a screen behind it. Allow a narrow beam of light to strike the prism (P1). The white light is dispersed, resulting in a seven-color band on the screen.


Dispersed White Light


Remove the screen and replace it with another prism P2 of the same material oriented in the opposite direction. Put a white screen in front of P2. A white light spot appears on the screen. As a result, the dispersed light has been recombined by the second prism.


Reposition of the Dispersed White Light


Formation of a Rainbow 

The small raindrops that remain suspended in the air after the rain act as a prism. When sunlight passes through these raindrops, it disperses and we see the rainbow's seven colours. 

Atmospheric Refraction 

Atmospheric refraction is the apparent direction shift of a celestial object caused by light ray refraction as they pass through Earth's atmosphere. Starlight refraction causes the twinkling of stars and variations in the size of the Sun. 

Twinkling of Stars 


Twinkling of Stars


Light rays from the stars travel through layers of air of varying densities. These rays are continuously refracted and bend towards the normal as the refraction occurs from a rarer to a denser medium. The density of the layers of air changes as a result of air movement and convection currents. As a result, the position of the star's image changes after every short interval. The varying positions of the images formed at short intervals of time create the illusion that the star is twinkling.

Variation in the Size of the Sun 


Variation in the Size of the Sun


The Sun appears larger at dusk or dawn than it does at noon. This is due to the fact that when the sun is near the horizon, the rays of light it emits must pass through layers of air of increasing density. The sun appears to be larger due to the continuous bending of light. The sun appears smaller at noon than it does at dusk or dawn. This is due to the fact that light rays that normally fall on the earth's surface are not refracted.


Scattering of Light 

Scattering is a general physical process in which certain types of radiation, such as light or moving particles, are forced to deviate from a straight trajectory due to one or more localized non-uniformities in the medium through which they pass.


Scattering of Light


The earth's atmosphere contains a large number of molecules. These molecules scatter light in a variety of ways. The air contains numerous tiny particles, including dust and water vapour. As sunlight passes through the air, the shorter blue light waves are reflected and refracted by the particles, whereas the longer other coloured light waves are unaffected and are not reflected by the water vapour or dust in the air. As a result, blue is the most scattered colour, which explains the bluish colour of the sky. At sunset or sunrise, the sun rays must travel long distances through the atmosphere to reach us, and most of the blue light is scattered and does not reach us. As a result, the sky and sun appear reddish at sunrise and sunset.


Tyndall Effect 

The atmosphere of the Earth is a heterogeneous mixture of minute particles. Smoke, tiny water droplets, dust particles suspended in the air, and air molecules are examples of these particles. When a light beam collides with such air particles, the path of the beam becomes visible. Likewise, the path of a light beam passing through a true solution is not visible. However, its path becomes visible in a colloidal solution where the particle size is relatively large. The Tyndall effect is caused by the scattering of light by colloidal particles.


Tyndall Effect


The Tyndall effect is the visible scattering of light on the path of a light beam passing through a colloid system.


Notes of Physics Class 10 Chapter Light Reflection and Refraction

Students preparing for their board examination can go through Class 10 science light reflection and refraction notes to review important concepts quickly. It will also enable them to gain a comprehensive understanding of the same.

Class 10 Science Chapter 9 notes start with an overview of the following essential topics from the text:


Class 10 Chapter 9 Science Notes - Light

This section from notes of ch light Class 10 begins with discussing important concepts like light, rectilinear propagation of light, the reflection of light etc.  The two types of reflection of light – regular reflection or specular reflection and irregular or diffused reflection are also explained with the help of diagrams.

The main laws of reflection which include the following:

  • The angle of reflection and angle of incidence are equal.

  • At the point of incidence, the incident ray, normal and the reflected ray lie in the same plane.

These laws have also been discussed in a simple language to facilitate better understanding on the part of students.

Light reflection and refraction Class 10 notes also provide step-by-step guidance on how to draw the reflection of light by a plane surface.

Students will also be able to review their understanding of the nature of an image that is formed by a plane reflecting surface. Accordingly, an image can be classified into two types - virtual and real.

Lastly, notes of Chapter 9 science Class 10 also provide pointers that students must keep in mind while constructing ray diagrams.


Light and Reflection Class 10 Notes - Mirrors

In the next part, from light reflection and refraction Class 10 notes, students can revise spherical mirrors, which are essential objects with a hollow sphere of glass or plastic that has a polished and reflecting surface.

Based on the surface of mirrors, it can be classified into two types – convex and concave. He main differences between the two have been explained thoroughly so that students can memorise the essential points quickly.

Apart from that, several important terms have also been discussed in light reflection and refraction Class 10 notes. These are as follows:

  • Centre of curvature.

  • Radius of Curvature.

  • Linear Aperture.

  • Pole.

  • Principal axis.

  • Secondary Axis.

  • Normal.

  • Principal focus.

  • Focal length.

Additionally, students will also be able to revise sign conventions that are used to measure distances in a spherical mirror ray diagram from notes of Chapter 9 Class 10 science. These include essential points, such as:

  • An object should always be placed to the left side of a reflecting surface.

  • When a distance measured from the direction of the incident ray, it will always be positive. When it is measured in the opposite direction, it will be negative.

Some of the main uses of concave and convex mirrors have also been mentioned here. For instance, convex mirrors are used as rear-view mirrors, reflectors in street lamps, vigilance mirrors in departmental stores and the like. On the other hand, concave mirrors as automobile reflectors, shaving mirrors etc.

Magnification, which is one of the crucial topics in this Chapter, has also been explained thoroughly in light reflection and refraction Class 10 notes so that you can have a thorough grasp on the same.


Class 10 Science Chapter Light Reflection and Refraction Note - Refraction

In this segment, students will revise important aspects of refraction, which is a phenomenon where light passes deviate from one medium to another. Some essential terms related to refraction have also been explained straightforwardly in light reflection and refraction Class 10 notes to aid students with their revision before exams. These include the following:

  • Angle of refraction.

  • Angle of incidence.

  • Normal.

  • Incident ray.

  • Point of incidence.

  • Refracted ray.

  • Laws of refraction.

This section from light reflection and refraction Class 10 notes also explains the process of refraction of light through a glass slab, which will enable students to retain the fundamental concepts.

Important Questions from CBSE Class 10 Science Chapter 9 - Light Reflection and Refraction 

  1. The focal length of a concave lens is 20 cm. From the lens, at what distance should a 5 cm tall object be placed to form an image that is at 15 cm from the lens? Also, detemine the size of the image that is formed.

  2. Explain the meaning of the statement “The refractive index of diamond is 2.42.” with respect to the speed of light.

  3. When a pencil is partly immersed in water, it appears to be bent at the water surface. Explain this with the help of a diagram.

  4. When a ray of light travels from one medium to another, why does it bend?

Benefits of Studying the CBSE Class 10 Revision Notes on Science Chapter 9 - Light Reflection and Refraction 

Following are the advantages of studying Vedantu’s CBSE Class 10 Revision Notes on Science Chapter 9 - Light Reflection and Refraction: 

  • Thinking Out of the Box

  • Getting to Know Possible Important Questions of Chapter 9 Class 10 Science

  • Making Concepts Easier to Understand

  • Efficient Answering Methods

  • Mastering Solving Numerical Questions

Students can now refer to Vedantu revision notes to gain more clarity on the lens, types of lens and their uses and the concept of magnification. Besides the light reflection and refraction Class 10 notes, students can also access the online courses on the subject held by experienced teachers for thorough preparation.

FAQs on Light Reflection and Refraction Class 10 Notes CBSE Science Chapter 9 (Free PDF Download)

1. What is meant by dispersion?

When light passes through a transparent medium, it splits into its constituent colours. This process is known as dispersion. Additionally, the band of constituent colours are known as the spectrum. Students can refer to light reflection and refraction Class 10 notes to learn more about the experiment performed by Newton on the dispersion of light.

2. What is meant by the recomposition of white light?

When all the constituent colours from the dispersion of light are rearranged to obtain white light again, it is known as the recomposition of white light.

3. What is the Tyndall Effect?

When a beam of light gets scattered as it passes through any medium containing colloid particles is known as a Tyndall effect. Because of this phenomenon, we can see a ray of sunlight as it enters a room through a window. Students should also remember that this is also the reason why we cannot view the path of light as it passes through a true solution.

4. How does atmospheric refraction take place?

Any shift in the direction of a celestial object which is a direct result of refraction in light rays as they pass through the atmosphere of the earth is known as atmospheric refraction. Two prominent examples of this phenomenon are the twinkling of stars and changes in the size of the sun.


In the case of the twinkling of stars, lights from a star pass through several layers of air with varying densities. As a result, the rays are continuously being refracted. Consequently, the image of the star varies continuously, which gives the impression of twinkling to our naked eye.

5. What is light refraction according to Chapter 9 of Class 10 Science?

Students are already familiar with the reflection of light and refraction is not difficult to understand either. When light travels from one medium to the other, it seems to deviate from its set path due to several factors such as a change in the density of the medium. This is to say that the direction of propagation of light in the second medium changes. This phenomenon is termed as the refraction of light which will be studied in detail in Chapter 9. 

6. What is a reflection in Chapter 9 of Class 10 Science?

We are well aware that any polished surface reflects light. This means that the light incident on this surface is transmitted back, without any loss. However, this is an ideal scenario and is possible only in certain situations. An example of this is total internal reflection. Thus, reflection is governed by certain laws. These laws of reflection can be applied to any and all types of reflecting surfaces. This includes plane and spherical surfaces. 


7. What are the types of spherical mirrors?

A spherical mirror is generally either concave or convex. This means that the reflecting surface is either curved inwards or outwards, respectively. In CBSE Class 10 Science Revision Notes of Chapter 9 - Light Reflection and Refraction, these spherical mirrors have been discussed in detail. Along with this, students are taught about image formation. You should definitely check out these notes to improve your knowledge on this topic as questions are frequently asked from here. The notes are available on the Vedantu app and website.


8. Do I have to draw ray diagrams in Chapter 9 of Class 10 Science?

Yes, you have to draw ray diagrams in this chapter. Ray diagrams give you an elementary understanding of image formation. They familiarise you with certain terminology and provide you with the tools needed to understand basic optics. Depending on the placement of the object and the type of mirror used, an image is formed. This is depicted using a ray diagram. These diagrams have been clearly drawn and explained in the Class 10 NCERT Physics textbook.

9. What are the uses of convex and concave mirrors?

Both convex and concave mirrors have a variety of applications in daily life. They are used for a large number of purposes. For example, convex mirrors are commonly found attached to the side of vehicles. This is because they are used as rear-view mirrors. In contrast to this, concave mirrors are used as part of searchlights and vehicle headlights. These enable us to obtain powerful parallel beams of light. Concave mirrors are also used in salons. To study more about mirrors, students can download the revision notes of this chapter free of cost.