Courses
Courses for Kids
Free study material
Offline Centres
More
Store Icon
Store
seo-qna
SearchIcon
banner

How long does it take for a TV capacitor to discharge?

Answer
VerifiedVerified
414.6k+ views
like imagedislike image
Hint: A capacitor is an electrical energy storage device that operates in an electric field. It's a two-terminal passive electrical component. Capacitance is the term used to describe the effect of a capacitor. While there is some capacitance between any two electrical conductors in close proximity in a circuit, a capacitor is a component that is specifically intended to provide capacitance to a circuit. Originally, the capacitor was known as a condenser or condenser.

Complete answer:
After one time period, a fully charged capacitor discharges to 63 percent of its original voltage. A capacitor discharges to approximately 0 percent of the voltage it originally had after 5 time periods. As a result, we may safely assume that the time it takes for a capacitor to discharge is 5 time constants.
The formula for calculating a capacitor's time constant is τ=RC . This number represents the time it takes a capacitor to discharge to 63 percent of the voltage that is charging it up (in seconds). The capacitor will discharge to approximately 0 percent of its original voltage after 5 time constants.
As a result, the formula for calculating how long a capacitor takes to discharge is: Time for a Capacitor to Discharge= 5RC
For all intents and purposes, the capacitor will be drained of virtually all of its voltage after 5 time constants. A capacitor never entirely discharges to 0 volts, although it comes close. The time it takes for the TV capacitor to discharge is determined on the type of television. Some capacitors discharge in minutes, while others may take many hours to drain. A bleeder resistor is usually wired in parallel to the capacitor in most contemporary devices. The capacitor is discharged by the bleeder resistor. If the bleeder resistor is unavailable or broken, the capacitor can be discharged using an external resistor of appropriate resistance.

Note:
Large or high voltage capacitors must be fully drained before measurements, soldering, or any other contact with the circuitry is made. This is for your safety and to prevent damage to the item under test as well as your test equipment. A potentially deadly charge is stored in some of the huge filter capacitors frequently seen in line-operated devices. This does not imply that each of your TV's 250 capacitors must be drained each time you turn it off and wish to take a measurement. If any substantial voltage is discovered after powering down, the big primary filter capacitors and other capacitors in the power supply should be examined and discharged.