In half wave rectifiers, a p-n diode with internal resistance 20 is used. If the load resistance of 2K is used in the circuit, then the efficiency of this half wave rectifier is(in percentage)
(A) 80.4%
(B) 40.2%
(C) 20%
(D) 50%
Answer
599.7k+ views
Hint: As we know, rectification efficiency is defined as the ratio between the output power to the ac input power. By using the efficiency formula we can find the efficiency of half wave rectifiers.
Complete step by step answer:
The efficiency \[\eta \] of half wave rectifier is given by,
\[\eta \]\[ = \dfrac{{0.406{R_L}}}{{{r_f} + {R_L}}}\]
\[\eta = \dfrac{{0.406}}{{1 + \dfrac{{{r_f}}}{{{R_L}}}}}\]
Here, ${R_L}$ is the resistance of the load resistor and ${r_f}$ is the resistance of the diode in forward biased condition.
So, efficiency is-\[\eta = \left( {\dfrac{{0.406}}{{1 + \dfrac{{{r_f}}}{{{R_L}}}}}} \right) \times 100\]
Here ${r_f}$ =\[20\Omega \]
${R_L}$ =\[2K\Omega \]
Now,
\[\Rightarrow \eta = \dfrac{{0.406}}{{\left( {1 + \dfrac{{20}}{{2000}}} \right)}} \times 100\]
\[\Rightarrow \eta = \dfrac{{0.406}}{{\left( {1 + 0.01} \right)}} \times 100\]
\[\Rightarrow \eta = \dfrac{{0.406}}{{\left( {1.01} \right)}} \times 100\]
\[\Rightarrow\eta = 0.4019 \times 100\]
\[\Rightarrow \eta = 40.2\% \]
So, the efficiency of the half wave rectifier is \[ = 40.2\% \], And the final answer is B.
Note: A rectifier is a device that converts alternating current (AC ) to direct current (DC). A half wave rectifier uses one diode whereas a full wave rectifier uses multiple diodes.
In a half wave rectifier, one half of each AC input cycle is rectified. It is defined as a type of rectifier that allows only one half-cycle of AC voltage waveform to pass and blocking the other half cycle. It used to convert AC voltage to DC voltage. The efficiency of half wave rectifiers is \[40.2\% \] whereas efficiency of the full wave rectifier is \[81.2\% \] .
Additionally there are different types of rectifiers- single phase, three phase rectifiers, half wave, full wave rectifiers, bridge rectifiers etc.
Complete step by step answer:
The efficiency \[\eta \] of half wave rectifier is given by,
\[\eta \]\[ = \dfrac{{0.406{R_L}}}{{{r_f} + {R_L}}}\]
\[\eta = \dfrac{{0.406}}{{1 + \dfrac{{{r_f}}}{{{R_L}}}}}\]
Here, ${R_L}$ is the resistance of the load resistor and ${r_f}$ is the resistance of the diode in forward biased condition.
So, efficiency is-\[\eta = \left( {\dfrac{{0.406}}{{1 + \dfrac{{{r_f}}}{{{R_L}}}}}} \right) \times 100\]
Here ${r_f}$ =\[20\Omega \]
${R_L}$ =\[2K\Omega \]
Now,
\[\Rightarrow \eta = \dfrac{{0.406}}{{\left( {1 + \dfrac{{20}}{{2000}}} \right)}} \times 100\]
\[\Rightarrow \eta = \dfrac{{0.406}}{{\left( {1 + 0.01} \right)}} \times 100\]
\[\Rightarrow \eta = \dfrac{{0.406}}{{\left( {1.01} \right)}} \times 100\]
\[\Rightarrow\eta = 0.4019 \times 100\]
\[\Rightarrow \eta = 40.2\% \]
So, the efficiency of the half wave rectifier is \[ = 40.2\% \], And the final answer is B.
Note: A rectifier is a device that converts alternating current (AC ) to direct current (DC). A half wave rectifier uses one diode whereas a full wave rectifier uses multiple diodes.
In a half wave rectifier, one half of each AC input cycle is rectified. It is defined as a type of rectifier that allows only one half-cycle of AC voltage waveform to pass and blocking the other half cycle. It used to convert AC voltage to DC voltage. The efficiency of half wave rectifiers is \[40.2\% \] whereas efficiency of the full wave rectifier is \[81.2\% \] .
Additionally there are different types of rectifiers- single phase, three phase rectifiers, half wave, full wave rectifiers, bridge rectifiers etc.
Recently Updated Pages
Three beakers labelled as A B and C each containing 25 mL of water were taken A small amount of NaOH anhydrous CuSO4 and NaCl were added to the beakers A B and C respectively It was observed that there was an increase in the temperature of the solutions contained in beakers A and B whereas in case of beaker C the temperature of the solution falls Which one of the following statements isarecorrect i In beakers A and B exothermic process has occurred ii In beakers A and B endothermic process has occurred iii In beaker C exothermic process has occurred iv In beaker C endothermic process has occurred

Master Class 12 Social Science: Engaging Questions & Answers for Success

Master Class 12 Physics: Engaging Questions & Answers for Success

Master Class 12 Maths: Engaging Questions & Answers for Success

Master Class 12 Economics: Engaging Questions & Answers for Success

Master Class 12 Chemistry: Engaging Questions & Answers for Success

Trending doubts
Which are the Top 10 Largest Countries of the World?

Draw a labelled sketch of the human eye class 12 physics CBSE

Differentiate between homogeneous and heterogeneous class 12 chemistry CBSE

What are the major means of transport Explain each class 12 social science CBSE

Sulphuric acid is known as the king of acids State class 12 chemistry CBSE

Why should a magnesium ribbon be cleaned before burning class 12 chemistry CBSE

