Answer
Verified
307.5k+ views
Hint: Amplification is the process of increasing the strength of the signal. The amplifier is the device that amplifies the signal. the amplifier used to improve the strength of the signal without changing the shape of the original signal.
Complete step by step solution:
An amplifier is used to describe a circuit that increases the strength of the input signal, but not all amplifiers are the same as they are classified according to their circuit configurations and methods of operation.
The classification of an amplifier is Operational Amplifiers and Small Signal Amplifiers up to Large Signal and Power Amplifiers. The amplifier classification depends upon the size of the signal, large or small, its physical configuration, and how it processes the input signal, which is the relationship between the input signal and the current flowing.
Suppose if we have an electronic signal available but we need to “strengthen.” We use an amplifier to boost up the weak input signal. For Example, the headphone signal from smartphones needs to be amplified to make a speaker loud to hear.
The input signal is defined by voltage, current, and power. An amplifier can generate the voltage bigger at the same current, the current gets strengthen without affecting the voltage, or it can change both the voltage and current
The amplifier principle is to generate an output signal that is a replica of the input signal with an increased higher magnitude.
Note:
Amplifiers strengthen or boost the weak signal without changing any input or information.
Negative feedback is used in amplifiers. The negative feedback is due to decreasing the gain of the amplifier.
If the gain is decreased, noise also decreases so system stability increases.
Complete step by step solution:
An amplifier is used to describe a circuit that increases the strength of the input signal, but not all amplifiers are the same as they are classified according to their circuit configurations and methods of operation.
The classification of an amplifier is Operational Amplifiers and Small Signal Amplifiers up to Large Signal and Power Amplifiers. The amplifier classification depends upon the size of the signal, large or small, its physical configuration, and how it processes the input signal, which is the relationship between the input signal and the current flowing.
Suppose if we have an electronic signal available but we need to “strengthen.” We use an amplifier to boost up the weak input signal. For Example, the headphone signal from smartphones needs to be amplified to make a speaker loud to hear.
The input signal is defined by voltage, current, and power. An amplifier can generate the voltage bigger at the same current, the current gets strengthen without affecting the voltage, or it can change both the voltage and current
The amplifier principle is to generate an output signal that is a replica of the input signal with an increased higher magnitude.
Note:
Amplifiers strengthen or boost the weak signal without changing any input or information.
Negative feedback is used in amplifiers. The negative feedback is due to decreasing the gain of the amplifier.
If the gain is decreased, noise also decreases so system stability increases.
Recently Updated Pages
Basicity of sulphurous acid and sulphuric acid are
Assertion The resistivity of a semiconductor increases class 13 physics CBSE
Three beakers labelled as A B and C each containing 25 mL of water were taken A small amount of NaOH anhydrous CuSO4 and NaCl were added to the beakers A B and C respectively It was observed that there was an increase in the temperature of the solutions contained in beakers A and B whereas in case of beaker C the temperature of the solution falls Which one of the following statements isarecorrect i In beakers A and B exothermic process has occurred ii In beakers A and B endothermic process has occurred iii In beaker C exothermic process has occurred iv In beaker C endothermic process has occurred
The branch of science which deals with nature and natural class 10 physics CBSE
What is the stopping potential when the metal with class 12 physics JEE_Main
The momentum of a photon is 2 times 10 16gm cmsec Its class 12 physics JEE_Main
Trending doubts
Fill the blanks with the suitable prepositions 1 The class 9 english CBSE
Difference between Prokaryotic cell and Eukaryotic class 11 biology CBSE
Difference Between Plant Cell and Animal Cell
Fill the blanks with proper collective nouns 1 A of class 10 english CBSE
What is the color of ferrous sulphate crystals? How does this color change after heating? Name the products formed on strongly heating ferrous sulphate crystals. What type of chemical reaction occurs in this type of change.
One Metric ton is equal to kg A 10000 B 1000 C 100 class 11 physics CBSE
Change the following sentences into negative and interrogative class 10 english CBSE
Net gain of ATP in glycolysis a 6 b 2 c 4 d 8 class 11 biology CBSE
What organs are located on the left side of your body class 11 biology CBSE