
A steel wire is suspended vertically from a rigid support. When loaded with a weight in the air, it is extended by ${l_a}$ and when the weight is immersed completely in water, the extension is reduced to ${l_w}$. Then the relative density of the material of the weight is:
A. $\dfrac{{{l_a}}}{{{l_w}}}$
B. $\dfrac{{{l_a}}}{{{l_a} - {l_w}}}$
C. $\dfrac{{{l_w}}}{{({l_a} - {l_w})}}$
D. $\dfrac{{{l_w}}}{{{l_a}}}$
Answer
464.7k+ views
Hint:Elasticity is the property of a material by the virtue of which it opposes the change in its shape size or length and regains its initial state as the applied force is removed. According to Hooke's law, if the strain is small, the stress produced in the body is proportional to the strain. Modulus of elasticity is defined for the material as the ratio of stress and strain.
Complete step by step answer:
It is given that the extended length in air is ${l_a}$ and the reduced length in water is ${l_w}$. We have to find the relative density of the weight.The ratio of longitudinal stress to longitudinal strain is called young's modulus of elasticity. Young modulus is given by the following formula.
$Y = \dfrac{{Fl}}{{A\Delta l}}$
Here, $F$ is the force, $l$ is the initial length of the wire, $A$ is the area of cross-section, and $\Delta l$ is the change in the length of wire.
So, we can write the young's modulus for both air and water.
$Y = \dfrac{{Fl}}{{A{l_a}}} = \dfrac{{mgl}}{{A{l_a}}}$…………….(1)
$\Rightarrow Y = \dfrac{{{F^1}l}}{{A{l_w}}} \\
\Rightarrow Y = \dfrac{{\left( {mg - \rho Vg} \right)}}{{A{l_w}}}$ ……………..(2)
Now, we know that young's modulus is constant for the material, i.e., equation (1) is equal to equation (2).
$\dfrac{{mgl}}{{A{l_a}}} = \dfrac{{\left( {mg - \rho Vg} \right)}}{{A{l_w}}}$
Let us further simplify this.
$\dfrac{{ml}}{{{l_a}}} = \dfrac{{\left( {m - \rho V} \right)}}{{{l_w}}} \\
\Rightarrow \rho = \dfrac{m}{V} \times \left( {1 - \dfrac{{{l_w}}}{{{l_a}}}} \right)$
We know, density is mass divided by volume.
$\rho = {\rho ^1} \times \left( {1 - \dfrac{{{l_w}}}{{{l_a}}}} \right) \\
\therefore \dfrac{\rho }{{{\rho ^1}}} = \dfrac{{{l_a}}}{{{l_a} - {l_w}}}$
Hence, the correct option is B.
Note:When an object is hanging the force acting on it is its weight $mg$.In the water, buoyancy force acts on an object which is equal to the weight of the object minus the upward thrust by the water.
Complete step by step answer:
It is given that the extended length in air is ${l_a}$ and the reduced length in water is ${l_w}$. We have to find the relative density of the weight.The ratio of longitudinal stress to longitudinal strain is called young's modulus of elasticity. Young modulus is given by the following formula.
$Y = \dfrac{{Fl}}{{A\Delta l}}$
Here, $F$ is the force, $l$ is the initial length of the wire, $A$ is the area of cross-section, and $\Delta l$ is the change in the length of wire.
So, we can write the young's modulus for both air and water.
$Y = \dfrac{{Fl}}{{A{l_a}}} = \dfrac{{mgl}}{{A{l_a}}}$…………….(1)
$\Rightarrow Y = \dfrac{{{F^1}l}}{{A{l_w}}} \\
\Rightarrow Y = \dfrac{{\left( {mg - \rho Vg} \right)}}{{A{l_w}}}$ ……………..(2)
Now, we know that young's modulus is constant for the material, i.e., equation (1) is equal to equation (2).
$\dfrac{{mgl}}{{A{l_a}}} = \dfrac{{\left( {mg - \rho Vg} \right)}}{{A{l_w}}}$
Let us further simplify this.
$\dfrac{{ml}}{{{l_a}}} = \dfrac{{\left( {m - \rho V} \right)}}{{{l_w}}} \\
\Rightarrow \rho = \dfrac{m}{V} \times \left( {1 - \dfrac{{{l_w}}}{{{l_a}}}} \right)$
We know, density is mass divided by volume.
$\rho = {\rho ^1} \times \left( {1 - \dfrac{{{l_w}}}{{{l_a}}}} \right) \\
\therefore \dfrac{\rho }{{{\rho ^1}}} = \dfrac{{{l_a}}}{{{l_a} - {l_w}}}$
Hence, the correct option is B.
Note:When an object is hanging the force acting on it is its weight $mg$.In the water, buoyancy force acts on an object which is equal to the weight of the object minus the upward thrust by the water.
Recently Updated Pages
Why are manures considered better than fertilizers class 11 biology CBSE

Find the coordinates of the midpoint of the line segment class 11 maths CBSE

Distinguish between static friction limiting friction class 11 physics CBSE

The Chairman of the constituent Assembly was A Jawaharlal class 11 social science CBSE

The first National Commission on Labour NCL submitted class 11 social science CBSE

Number of all subshell of n + l 7 is A 4 B 5 C 6 D class 11 chemistry CBSE

Trending doubts
Differentiate between an exothermic and an endothermic class 11 chemistry CBSE

10 examples of friction in our daily life

One Metric ton is equal to kg A 10000 B 1000 C 100 class 11 physics CBSE

Difference Between Prokaryotic Cells and Eukaryotic Cells

1 Quintal is equal to a 110 kg b 10 kg c 100kg d 1000 class 11 physics CBSE

State the laws of reflection of light

