A small spherical drop falls from rest in viscous liquid. Due to the friction, heat is produced. The correct relation between the rate of production and the radius of the spherical drop at terminal velocity will be
\[
(A)\dfrac{{dH}}{{dt}} \propto \dfrac{1}{{{r^5}}} \\
(B)\dfrac{{dH}}{{dt}} \propto {r^4} \\
(C)\dfrac{{dH}}{{dt}} \propto \dfrac{1}{{{r^4}}} \\
(D)\dfrac{{dH}}{{dt}} \propto {r^5} \\
\]
Answer
606.6k+ views
Hints:-
Heat (\[H\]) is the form of energy and rate of production of heat (\[\dfrac{{dH}}{{dt}}\]) is equal to the power in that process \[power(P) = force(f) \times velocity(v)\]. Terminal velocity is depends on the force, \[f = 6\pi \eta v\]
Complete step by step solution:-
Here we need to find the relation between rate of production of heat (\[\dfrac{{dH}}{{dt}}\]) and radius of sphere \[(r)\].
Here, we use a useful relation, Rate of production of heat\[ = \] power produced by the forces in this process.
Ie, \[\dfrac{{dH}}{{dt}} = P\]
But, \[power(P) = force(f) \times velocity(v) = {F_v} \times v\]
Where \[{F_v}\] is the viscous force. And \[v\]is the terminal velocity .
Viscous force is given by \[{F_v} = 6\pi \eta v\]
\[\eta \]is the coefficient of viscosity. It is constant for a particular liquid.
So, \[{F_v} \propto v\]
\[\dfrac{{dH}}{{dt}} = P = {F_v}v\]
\[
\dfrac{{dH}}{{dt}} \propto v \times v \\
\dfrac{{dH}}{{dt}} \propto {v^2} \\
\]
Now, the terminal velocity is given by \[v = \dfrac{2}{9}{r^2}\dfrac{{({D_s} - {D_l})}}{\eta }g\]
\[g\]:- The acceleration due to gravity.
\[{D_s}\]:- The density of material of drop.
\[{D_l}\]:- The density of liquid.
These three terms are constants in this case so,
\[v \propto {r^2}\]
But,
\[
\dfrac{{dH}}{{dt}} \propto {v^2} \\
\dfrac{{dH}}{{dt}} \propto {({r^2})^2} \\
\]
\[\dfrac{{dH}}{{dt}} \propto {r^4}\]
So the answer is (B) \[\dfrac{{dH}}{{dt}} \propto {r^4}\]
Note:- The heat is measured by the unit Joule \[\left( J \right)\] and power in Watt \[\left( W \right).\] Speed of rain drop is constant after some time because of this viscous force.
Heat (\[H\]) is the form of energy and rate of production of heat (\[\dfrac{{dH}}{{dt}}\]) is equal to the power in that process \[power(P) = force(f) \times velocity(v)\]. Terminal velocity is depends on the force, \[f = 6\pi \eta v\]
Complete step by step solution:-
Here we need to find the relation between rate of production of heat (\[\dfrac{{dH}}{{dt}}\]) and radius of sphere \[(r)\].
Here, we use a useful relation, Rate of production of heat\[ = \] power produced by the forces in this process.
Ie, \[\dfrac{{dH}}{{dt}} = P\]
But, \[power(P) = force(f) \times velocity(v) = {F_v} \times v\]
Where \[{F_v}\] is the viscous force. And \[v\]is the terminal velocity .
Viscous force is given by \[{F_v} = 6\pi \eta v\]
\[\eta \]is the coefficient of viscosity. It is constant for a particular liquid.
So, \[{F_v} \propto v\]
\[\dfrac{{dH}}{{dt}} = P = {F_v}v\]
\[
\dfrac{{dH}}{{dt}} \propto v \times v \\
\dfrac{{dH}}{{dt}} \propto {v^2} \\
\]
Now, the terminal velocity is given by \[v = \dfrac{2}{9}{r^2}\dfrac{{({D_s} - {D_l})}}{\eta }g\]
\[g\]:- The acceleration due to gravity.
\[{D_s}\]:- The density of material of drop.
\[{D_l}\]:- The density of liquid.
These three terms are constants in this case so,
\[v \propto {r^2}\]
But,
\[
\dfrac{{dH}}{{dt}} \propto {v^2} \\
\dfrac{{dH}}{{dt}} \propto {({r^2})^2} \\
\]
\[\dfrac{{dH}}{{dt}} \propto {r^4}\]
So the answer is (B) \[\dfrac{{dH}}{{dt}} \propto {r^4}\]
Note:- The heat is measured by the unit Joule \[\left( J \right)\] and power in Watt \[\left( W \right).\] Speed of rain drop is constant after some time because of this viscous force.
Recently Updated Pages
Three beakers labelled as A B and C each containing 25 mL of water were taken A small amount of NaOH anhydrous CuSO4 and NaCl were added to the beakers A B and C respectively It was observed that there was an increase in the temperature of the solutions contained in beakers A and B whereas in case of beaker C the temperature of the solution falls Which one of the following statements isarecorrect i In beakers A and B exothermic process has occurred ii In beakers A and B endothermic process has occurred iii In beaker C exothermic process has occurred iv In beaker C endothermic process has occurred

Master Class 11 Social Science: Engaging Questions & Answers for Success

Master Class 11 Physics: Engaging Questions & Answers for Success

Master Class 11 Maths: Engaging Questions & Answers for Success

Master Class 11 Economics: Engaging Questions & Answers for Success

Master Class 11 Computer Science: Engaging Questions & Answers for Success

Trending doubts
One Metric ton is equal to kg A 10000 B 1000 C 100 class 11 physics CBSE

There are 720 permutations of the digits 1 2 3 4 5 class 11 maths CBSE

State and prove Bernoullis theorem class 11 physics CBSE

Draw a diagram of a plant cell and label at least eight class 11 biology CBSE

Difference Between Prokaryotic Cells and Eukaryotic Cells

Discuss the various forms of bacteria class 11 biology CBSE

