Question

Where should an exhaust fan in the kitchen window be set up?
A. On top of the window
B. At the base of the window
C. Anywhere on the window
D. Exhaust fan need not to be installed on the window

Answer 1

Hint: In order to this question, to know whether which position should be used to install exhaust fan in the kitchen window be set up, we will discuss the whole phenomena of installing exhaust fan at the right position in the kitchen.

Complete answer:
Exhaust fans are used to expel excess being generated while cooking in the kitchen. As smoke rises up in the air fast, exhaust should be set up on the top part of the window.The steps that should be taken for proper exhaust fan kitchen installation are not that difficult:-

So, first and foremost, a ceiling exhaust hole must be planned. We utilised a stud finder to locate the proper location on our ceiling for cutting a safe hole. We pressed the point of our drywall saw through the ceiling drywall after locating the suitable area. From the attic, the saw blade should be visible. It is recommended that any insulation around the blade be removed.

The vent pipe must now be inserted. Using a drywall saw, cut a circle on your ceiling drywall that is comparable to the vent pipe end shape and install the vent pipe there. Return to the attic when this step is completed and connect a 4-inch duct elbow to the previously cut exhaust port. Use foil duct tape to make the attachment.

After that, it's time to connect the vent fan. Attach a cable connector to the fan housing after that. Install the new vent fan and brackets into the cut ceiling hole. Connect the brackets to the nearest ceiling joist using screws. Attach the flex duct to the elbow linked to the vent with duct tape.Then we'll need to make an exhaust hole. The location for this hole should be close to the inserted vent fan and between the outside wall joists.

Make a through wall hole with a long narrow bit and a cordless drill.The wall cap should be put through the opening in the outer wall and the connector duct should be linked to it. After that, apply a rubber gasket, seal the edges with silicon, screw the cap tightly to the inner wall's surface, and attach the wall cap to the exhaust duct end with foil duct tape.

Wiring is the final step to a joyful existence. Connect the fan's grill to all of the relevant wires in the kitchen. Finally, for testing purposes, turn on the fan and open the fan switch. I hope that these instructions will assist you in dealing with this smart and handy device.

Hence, the correct option is A.

Note:A kitchen exhaust fan is essential if we enjoy cooking. A kitchen exhaust fan, also known as a hood fan or a range hood, is used to remove oil, smoke, and odours from the air while cooking in the oven or on the stovetop. A ducted kitchen exhaust fan pulls air from our kitchen and distributes it outside through a conduit.